Features:
TPE materials can provide ultra-soft series with a hardness of 0-10A or even softer. They are 100% recyclable, easy to process, easy to color, and low in price. They can also maintain good elasticity and tensile properties at lower temperatures.
The TPE material selected for artificial fishing bait has the following characteristics:
1. It is transparent, soft and odorless, and can provide ultra-soft series of soft rubber materials with a hardness of 0~10A or even higher.
2. It can spray ink to produce realistic fishing bait patterns.
3. Environmentally friendly, non-toxic, thermoplastic material, 100% recyclable
4. It can be injection molded or filled with glue.
5. It has good toughness and is not easy to break. It can be used repeatedly for a long time, which can greatly reduce the cost of fishing bait for anglers.
6. At -50ºC, it still maintains good elasticity and stretchability, and has good low temperature resistance.
7. Super soft TPE and TPR have a soft touch similar to earthworms, frogs, fish and shrimps and other molluscs. By adjusting the color and smell of the bait, it can achieve almost the same effect as real bait.
Fishing bait products on the market have put forward increasingly higher requirements for the transparency, feel and elasticity of the products, such as the soft touch of earthworms, frogs, fish and shrimps and other molluscs.
Highly transparent TPE 5A, 8A,10A, 12A, 0A. Simulated skin, odorless and oil-free. High transparency up to 98%. It can also be made with skin color, high ductility and excellent resilience, high tensile performance, good fluidity, and resistance to yellowing. It can replace silicone/PVC materials, has no odor, no oil, and does not require spraying. The material is usually transparent or translucent particles, non-toxic and odorless. It has excellent elongation, up to 1500%.
The feel of 0-degree TPE material is close to that of silicone. It is generally used in two molding methods: injection molding or pouring. It is mainly used to produce sex toys, toys, gel cushions, and car anti-skid mats.
The injection molding efficiency of 0-degree TPE is relatively low because the hardness is too low and the processed product shrinks greatly, with a shrinkage rate of 1.6~2.0%. Water streaks will appear on the surface. The recommended injection molding temperature is between 120-150 degrees Celsius. The particles of 0-degree materials are all sticky, which may cause feeding difficulties during the production process. We recommend that injection molding manufacturers lower the temperature in the discharge port area and use push-type auxiliary feeding, such as pressing down with a stick, which is direct and effective. A forced feeder can also be installed, using a high speed and low feeding method. The heating section of the unloading area is closed.
Audited Supplier 
){kind=link}